8051-based Microcontroller |
設備 |
描述 |
AT89C5130A-M |
USB C51-based Microcontroller with 16K Bytes Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Extended Range Power Supply: 2.7V to 5.5V, 7 USB Endpoints, TWI, SPI, UART, PCA |
AT89C5131A-L |
USB C51-based Microcontroller with 32K Bytes Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Low Voltage Range Power Supply: 3.0V to 3.6V, 7 USB Endpoints, TWI, SPI, UART, PCA. Recommended device with extended voltage range: AT89C5131A-M (2.7-5.5V). |
AT89C5131A-M |
USB C51-based Microcontroller with 32K Bytes Flash, 1K Byte Data EEPROM, 1280 bytes RAM, Extended Range Power Supply: 2.7V to 5.5V, 7 USB Endpoints, TWI, SPI, UART, PCA |
AT89C5132 |
USB C51-based Microcontroller with 64K Bytes Flash, 2304 bytes RAM, 4 USB Endpoints, SPI, UART, IDE, TWI, MultiMediaCard, DataFlash, I2S, 10-bit ADC. |
AVR-based Flash Microcontroller |
設備 |
描述 |
AT90USB1286 |
USB Function Microcontroller. 128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
AT90USB1287 |
USB On-The-Go (OTG) Microcontroller. 128-Kbyte self-programming Flash Program Memory, 8-Kbyte SRAM, 4-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
AT90USB646 |
USB Function Microcontroller. 64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
AT90USB647 |
USB On-The-Go (OTG) Microcontroller. 64-Kbyte self-programming Flash Program Memory, 4-Kbyte SRAM, 2-Kbyte EEPROM, 8 Channel 10-bit A/D-converter. JTAG interface for on-chip-debug. Up to 16 MIPS throughput at 16 MHz. 2.7 - 5.5 Volt operation. |
AVR-based Function Controller |
設備 |
描述 |
AT43USB325 |
Multimedia keyboard controller with embedded 4-port hub, 16 Kbytes of program memory, 4 programmable USB function endpoints, 512 bytes of data SRAM and support for 20x8 keyboard matrix. Available in SRAM and Mask ROM versions.
Please register to download the USB documentation, software and drivers. |
AT43USB326 |
USB Multimedia keyboard controller with an embedded two port hub, 3 programmable USB function endpoints. 16 Kbytes program ROM, 512 bytes SRAM and support for multiple 18 x 8 keyboard matrix.
Please register to download the USB documentation, software and drivers. |
AT43USB353M |
Low cost full speed USB microcontroller with embedded Hub, ADC and PWM.
Please register to download the USB documentation, software and drivers. |
AT43USB351M |
Low-/full-speed configurable USB microcontroller with a 1.5/12/24 MIPS AVR, 5 function endpoints, 12-channel 10-bit ADC, PWM and 24 Kbytes of program ROM.
Please register to download the USB documentation, software and drivers. |
AT43USB355 |
Full-speed USB microcontroller with a 12 MIPS AVR, 3 function endpoints, a 2-port Hub and 12-channel 10-bit ADC, PWM and 24 Kbytes of program SRAM or mask ROM.
Please register to download the USB documentation, software and drivers. |
AT76C712 |
High-speed (48 MHz) AVR?based bridging device. This High Speed USB bridge chip includes a USB to serial bridge that supports two 16550 UART modules with 16 bytes FIFOs in each direction. |
AT76C713 |
High-speed (48 MHz) AVR microcontroller with USB interface, dual enhanced serial ports, configurable Program and Data Memory space, support of Device Firmware Upgrade (DFU) in bootstrap ROM, external Data Memory interface, two fast UART ports with IrDA coding capabilities and JTAG interface for on-chip debugging. |
Dual Role (OTG/Host/Function) Controller |
設備 |
描述 |
AT43USB380 |
On-The-Go Upgrade of the AT43USB370 USB 2.0 Full-Speed Host/Function Processor. The AT43USB380 provides three modes of operation: OTG, host, and device. It comes with 32-/16-/8-bit system bus interface with DMA capability. It is supported by a comprehensive set of USB software suite including standard USB class drivers.
Please register to download the USB documentation, software and drivers. |
Hubs |
設備 |
描述 |
AT43301 |
Low cost, self- and bus-powered, full-speed HUB controller with ganged port power switching and global overcurrent protection |
AT43312A |
Self- and bus-powered, full-speed HUB controller with individual port power switching and global overcurrent protection. SOIC package (AT43312A-SC) is not recommended for new design. |